Metal Seated Ball Valves

KACE metal seated ball valves are available in four series: 80M Series (high-pressure), FM Series (floating ball), GM Series (trunnion mounted) and TM Series (trunnion mounted)

 

GM Series

Standard features

  • Split Body Design for Ease of Maintenance
  • Blow Out Proof Stem Design
  • Locking Device Standard
  • -20º ~ 500º F (Glass Filled Teflon)

Specifications

  • 1/2″ ~ 8″
  • Reduced Bore
  • ANSI Ratings 150# ~ 1500#
  • Split Body Construction
  • RF & RTJ Connections
  • Body Material Carbon Steel, 316 S.S., Alloys
  • Ball Material 316 S.S.
  • Stem Material 316 S.S.
  • Seats PTFE, RTFE, PEEK

Standards

  • ANSI B16.5
  • ANSI B16.10
  • ANSI B16.34
  • API 607
  • API 598
  • API 5211
  • NACE MR-10-75

TECHNICAL DATA

PART NUMBER NAME QTY DESCRIPTION
1 Body 1 ASTM A182 316
2 Body Cap 2 ASTM A182 316
3 Ball 1 ASTM A182 316 + NI60
4 Upper Stem 1 17 – 4 PH (NACE)
5 Seat 2 ASTM A182 316 + NI55
6 Lower Stem 1 ASTM A182 316
7 Seat Pusher 2 ASTM A182 316
8 Sea Seal Ring 2 Graphite
9 Spring 1 Set Inconel X – 750
10 Gland Flange 1 ASTM A182 316
11 Gland Follower 1 ASTM A182 316
12 Bonnet 1 ASTM A182 316
13 Packing Ring 1 ASTM A182 316
14 O-Ring 1 Graphite
15 O-Ring 1 Viton
16 O-Ring 1 Viton
17 O-Ring 2 Viton
18 O-Ring 2 Viton
19 O-Ring 1 Viton
20 Gasket 2 316 Spiral Wound Graphite
21 Gasket 1 316 Spiral Wound Graphite
22 Gasket 1 316 Spiral Wound Graphite
23 Bearing 1 PEEK
24 Bearing 1 PEEK
25 Bearing 1 PEEK
26 Bolt 1 Set ASTM A193 B8A
27 Stud 2 ASTM A193 B8A
28 Nut 2 ASTM A193 B8A (Heavy)
29 Stud 1 Set ASTM A193 B8A
30 Nut 1 Set ASTM A193 B8A (Heavy)
31 Stud 1 Set ASTM A193 B8A
32 Nut 1 Set ASTM A194 8A
33 Spring Washer 1 Set AISI 1066
34 Pin 2 AISI 1035
35 Thrust Washer 1 ASTM A182 316
36 Packing 1 Graphite
37 Disk Spring 1 Set 17 – 7 PH
38 Grounding Spring 1 ASTM A182 316
39 Grounding Plug 1 ASTM A182 316
40 Thrust Washer 1 PEEK
41 Drain Plug 1 ASTM A182 304
42 Seal Ring 2 Graphite

80M, FM & TM Series

Standard features

  • 2 & 3 Piece Design for Ease of Maintenance
  • Blow Out Proof Stem Design
  • ISO 5211 Mounting Pad
  • Bi-Directional Sealing
  • Low Fugitive Emission Packing
  • Locking Device to API 608

Specifications

  • 1/2″ ~ 8″
  • Full Bore
  • ANSI Ratings 150# ~ 1500#
  • Split Body Construction
  • RF & RTJ Connections
  • Body Material Carbon Steel, 316 S.S., Alloys
  • Stem Material 316 S.S.
  • Seats PTFE, RTFE, PEEK, TFM-1600

Standards

  • ANSI B16.5
  • ANSI B16.10
  • API 608
  • API 6D
  • API 598
  • API 5211
  • ANSI B16.34

TECHNICAL DATA

CLASS NO. PART NAME MATERIAL
1 Body ASTM A105
2A Left Body Cap ASTM A105
2B Right Body Cap ASTM A105
3 Ball ASTM A182 316 + Ni60
4 Upper Stem 17-4PH (NACE)
5 Seat ASTM A182 316 + Ni55
6 Lower Stem Graphite + 304
7 Seat Pusher ASTM A182 316
8 Seat Seal Ring Graphite
9 Spring Inconel X750
10 Gland Flange ASTM A105
11 Gland Follower ASTM A182 316
12 Bonnet ASTM A105
13 O-Ring Viton
14 O-Ring Viton
15 O-Ring Viton
16 O-Ring Viton
17 O-Ring Viton
18 Gasket 304 Spiral Wound Graphite
19 Gasket 304 Spiral Wound Graphite
20 Gasket 304 Spiral Wound Graphite
21 Bearing PEEK
22 Bearing PEEK
23 Bearing PEEK
24 Bolt ASTM A193 B7M
25 Stud ASTM A193 B7M
26 Nut ASTM A193 BHM
27 Stud ASTM A216 WCB
28 Nut ASTM A193 2HM
29 Inner Hex Bolt AISI 1045
30 Pin ASTM A193 B7M
31 Thrust Washer ASTM A182 316
32 Packing Graphite
33 Disc Spring ASTM A182 316
34 Grounding Spring ASTM A182 316
35 Grounding Plug ASTM A182 316
36 Thrust Washer PEEK
37 Drain Plug ASTM A182 304
38 Thrust Washer PEEK