KACE T Series Trunnion Mounted
KACE T Series trunnion mounted ball valves are designed for general industrial and chemical applications
Standard features
- Blow Out Proof Stem Design
- ISO 5211 Mounting Pad
- Double Block & Bleed
- -20º ~ 500º F (Glass Filled Teflon)
- NACE MR-10-75
- Self Relieving Spring Loaded Seat
Specifications
- 2″ ~ 48″
- ANSI Ratings 150# ~ 1500#
- 3 Piece Body Construction (Forged)
- Split Body Construction (Cast)
- RF & RTJ Connections
- Body Material Carbon Steel, 316 S.S., Alloys
- Ball Material 316 S.S.
- Stem Material 316 S.S.
- Seats PTFE, RTFE, PEEK
Standards
- ANSI B16.5
- ANSI B16.10
- API 608 6D
- API 598
- API 5211
- ANSI B16.34
- NACE MR-01-75
T1 Series
TECHNICAL DATA
| PART NO. | NAME | QTY | DESCRIPTION |
|---|---|---|---|
| 1 | Body | 1 | ASTM A105 |
| 2 | Body Cap | 2 | ASTM A182 316 |
| 3 | Ball | 1 | ASTM A182 316 + NI60 |
| 4 | Upper Stem | 1 | 17 – 4 PH (NACE) |
| 5 | Seat | 2 | ASTM A182 316 + NI55 |
| 6 | Lower Stem | 1 | ASTM A182 316 |
| 7 | Seat Pusher | 2 | ASTM A182 316 |
| 8 | Seat Seal Ring | 2 | Graphite |
| 9 | Spring | 1 Set | Inconel X-750 |
| 10 | Gland Flange | 1 | ASTM A182 316 |
| 11 | Gland Follower | 1 | ASTM A182 316 |
| 12 | Bonnet | 1 | ASTM A182 316 |
| 13 | Packing Ring | 1 | ASTM A182 316 |
| 14 | O-Ring | 1 | Graphite |
| 15 | O-Ring | 1 | Viton |
| 16 | O-Ring | 1 | Viton |
| 17 | O-Ring | 2 | Viton |
| 18 | O-Ring | 2 | Viton |
| 19 | O-Ring | 1 | Viton |
| 20 | Gasket | 2 | 316 Spiral Wound Graphite |
| 21 | Gasket | 1 | 316 Spiral Wound Graphite |
| 22 | Gasket | 1 | 316 Spiral Wound Graphite |
| 23 | Bearing | 1 | PEEK |
| 24 | Bearing | 1 | PEEK |
| 25 | Bearing | 1 | PEEK |
| 26 | Bolt | 1 Set | ASTM A193 B8A |
| 27 | Stud | 2 | ASTM A193 B8A |
| 28 | Nut | 2 | ASTM A193 B8A (Heavy) |
| 29 | Stud | 1 Set | ASTM A193 B8A |
| 30 | Nut | 1 Set | ASTM A193 B8A (Heavy) |
| 31 | Stud | 1 Set | ASTM A193 B8A |
| 32 | Nut | 1 Set | ASTM A194 8A |
| 33 | Spring Washer | 1 Set | AISI 1066 |
| 34 | Pin | 2 | AISI 1035 |
| 35 | Thrust Washer | 1 | ASTM A182 316 |
| 36 | Packing | 1 | Graphite |
| 37 | Disk Spring | 1 Set | 17 – 7 PH |
| 38 | Grounding Spring | 1 | ASTM A182 316 |
| 39 | Grounding Plug | 1 | ASTM A182 316 |
| 40 | Thrust Washer | 1 | PEEK |
| 41 | Drain Plug | 1 | ASTM A182 304 |
| 42 | Seal Ring | 2 | Graphite |
T2 Series
TECHNICAL DATA
| PART NO. | NAME | MATERIAL |
|---|---|---|
| 1 | Right Body | ASTM A105 |
| 2 | Stud | ASTM A193 B7M |
| 3 | Nut | ASTM A194 2HM |
| 4 | O-Ring | Viton |
| 5 | Gasket | SW + AISI 304 with Graphite Filler |
| 6 | Body | ASTM A105 |
| 7 | Stud | ASTM A193 B7M |
| 8 | Nut | ASTM A194 2HM |
| 9 | Gasket | SW + AISI 304 with Graphite Filler |
| 10 | O-Ring | Viton |
| 11 | Lower Cover | ASTM A105 + ENP 3MIL |
| 12 | Drain Valve | ASTM A105 + HZn |
| 13 | Thrust Bearing | PTFE |
| 14 | Lower Stem Bearing | Metal Packed PTFE |
| 15 | Ball | ASTM A105 + ENP 3MIL |
| 16 | Left Body | ASTM A105 |
| 17 | Packing | Graphite |
| 18 | Seat | PTFE |
| 19 | Seat Retainer | ASTM A105 + ENP 3MIL |
| 20 | O-Ring | Viton |
| 21 | Spring | 17-7 PH |
| 22 | Stem | ASTM A105 + ENP |
| 23 | Stem Bearing | Metal Packed PTFE |
| 24 | Thrust Bearing | PTFE |
| 25 | O-Ring | Viton |
| 26 | Asket | SW + AISI 304 with Graphite Filler |
| 27 | Seal Cover | ASTM A105 + ENP 3MIL |
| 28 | O-Ring | Viton |
| 29 | Bolt | ASTM A193 B7M |
| 30 | Packing | Graphite |
| 31 | Gland | ASTM A216 WCB |
| 32 | Pin | AISI 1035 |
| 33 | Anti-Static Device | Assembly |
| 34 | Release Valve | ASTM A105 + HZn |
| 35 | Bolt | ASTM A193 B7M |